EnviroCulvert® Rubber Ring Jointed Pipes DN100-900MM 

EnviroCulvert® pipes in sizes 100mm up to 900mm are rubber ring jointed and each pipe is supplied with an ethylene propylene diene monomer (EPDM) rubber seal and lubricant. EnviroCulvert® pipes consist of an integrated socket and spigot, the spigot end is designed to accommodate the rubber seal, which when assembled forms a watertight joint from the radial compression of the rubber seal between the spigot and the socket ends.

The following procedure is recommended when jointing EnviroCulvert® rubber ring jointed pipes.

 

 

EnviroCulvert® Rubber Ring Jointed Pipes 1050 - 2000mm

EnviroCulvert® Rubber ring joint pipes are manufactured in sizes 1050mm up to 2000mm and each pipe is supplied with a set of EPDM rubber seals and lubricant. EnviroCulvert® pipes consist of an integrated socket and spigot; the spigot end is designed to accommodate the rubber seal, which when assembled forms a watertight joint from the radial compression of the rubber seal between the spigot and the socket ends.

Please see the video below for more information.

 

 

EnviroCulvert® Electro Fusion Jointed Pipes DN2500-4000MM 

EnviroCulvert® Electro-fusion jointed pipes are manufactured in sizes 1050mm up to 4000mm. After the pipes have been manufactured each pipe is prepared for electro-fusion welding and wrapped in a protective cover for fusion welding later on site. Enviropipes supplies electro-fusion machines and tooling suitable for welding these pipes together. With this method the whole pipeline becomes a homogenous system and absolutely safe against unwanted in/ex-filtrations. Using this jointing technique makes it possible to install large diameter pipes in short periods of time.

Please see the video below for more information.